Update: I receive many emails from people who are trying to update their DSL-2640T with Routertech firmware after looking at this thread or this post. I must update here that the Routertech team has declared this router as 'incompatible' with their wireless PSP firmware. If you're still going to update to this firmware, either know what you're doing and ask reasonable questions, or you're on your own.
Fixes: - Fix ddns will not start after reboot, when enabled. Fix autosense to include Annex M. About Router Firmware: Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release. D Link Dsl 2640u T1 Firmware Update I searched for its firmware everywhere. I mean even D-Link doesn't have the file for that particular hardware version (T1), the others can be found no problem.
Sturm, Ruger & Co., Inc. Our motto, 'Arms Makers for Responsible Citizens®,' echoes our commitment to these principles as we work hard to deliver quality and innovative firearms.Rugged, Reliable Firearms ® Copyright © 2020 by Sturm, Ruger & Co., Inc. With products made in America, Ruger offers consumers almost 700 variations of more than 40 product lines. For more than 70 years, Ruger has been a model of corporate and community responsibility. Is one of the nation's leading manufacturers of rugged, reliable firearms for the commercial sporting market. Ruger Mark I, Mark II and Mark III Serial Numbers - Muzzle First.
WARNING: Always check the firmware you need to download using RUC first (linked below).
Before you start, I must say that updating a router's firmware is not for the faint hearted and I take no responsibility if anything goes wrong with your router. This is pretty much a n00b friendly tutorial, so you should be okay, if you follow everything as written in the RouterTech's help docs and in this tutorial. Now over to the tutorial:
Please download the following tools and confirm the settings following afterward.
1- Download RUC (Router Update Checker, available here
2- Download WEB (Wireless Environment Builder, available here).
3- Download your router's latest official firmware (you should have a copy, in case this goes kaput).
Now whatever you do, don't blame me. Next open up RUC and enter your router login info, defaults are:
check all boxes at the bottom (they are there for a reason).
* You can edit the routers.txt and make an entry for DSL-2640T as follows too:
DSL-2640T 4 Civilization v - civ and scenario pack: denmark (the vikings) for mac 7.
Once RUC gives you a report, it should be similar to the following:
Now, the things to make sure in the above log are:
The above settings will qualify you for a RouterTech firmware upgrade. The reason to run RUC was to backup all your settings and configurations at one place. If you have not backed-up your settings, do it now. No one will be responsible, if you do this carelessly and brick your router.
Download RouterTech firmware from http://routertech.org/forum.php. You must register on the forum to download the firmware. For DSL2640T, you'll need the RoHS 4-port PSP firmware. It should be named something as follows:
routertech-rohs-ar7wrd-pspboot-firmware-xxxxxxx.zip
extract it to some directory and open up the upgrade.html file and DO WHAT IT SAYS.
1- back-up all your settings
a- /proc/ticfg/env
b- /proc/interrupts
c- /etc/led.conf
d- config.bin (using your router's 'save config to hard disk' option in the web panel)
2- reset your router to factory default settings. reboot.
3- once the router comes back online, save all settings and reboot again.
4- open up the update firmware panel in the router's web panel; Tools->Firmware and browse to where you extracted the above zip file and select:
routertech_ar7wrd_1350a_pspboot_firmware_xxxxxxx_xxx
Now click on Apply and pray to God that all goes well. Leave the router alone for about
8-10 MINUTES…
After ten minutes, telnet into your router again and see if it lets you log in using:
Log in using user:Admin and pass:Admin
If the router let you log in, go to your Router's web panel and into the System panel. Click on Restore Factory Settings and Reboot. Once the router comes online. Telnet back into your router:
type
and take a look at the variables and back them up.
Next perform the following steps:
once again, when the router comes back online. Telnet again into the router and type:
D Link Dsl 2640u T1 Firmware Update Download 64-bit
Reboot the router once again and you should have a working DSL-2640T running with everything on a custom routertech firmware. You can issue all the commands above in a single go but I say, do not mess with your router, unless you are confident of your actions.
For the people, who do not have their WLAN working, after the upgrade or even so before the upgrade, please follow the steps below:
A common issue for many people on a router exists, where the AP stays off and only comes online by using
D Link Dsl 2640u T1 Firmware Update Download Windows 7
However, this can create issues on the environment side and the solution itself is temporary too. The actual issue is a corrupted WLAN EEPROM, which needs to be fixed:
Update: I receive many emails from people who are trying to update their DSL-2640T with Routertech firmware after looking at this thread or this post. I must update here that the Routertech team has declared this router as 'incompatible' with their wireless PSP firmware. If you're still going to update to this firmware, either know what you're doing and ask reasonable questions, or you're on your own.
Fixes: - Fix ddns will not start after reboot, when enabled. Fix autosense to include Annex M. About Router Firmware: Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release. D Link Dsl 2640u T1 Firmware Update I searched for its firmware everywhere. I mean even D-Link doesn't have the file for that particular hardware version (T1), the others can be found no problem.
Sturm, Ruger & Co., Inc. Our motto, 'Arms Makers for Responsible Citizens®,' echoes our commitment to these principles as we work hard to deliver quality and innovative firearms.Rugged, Reliable Firearms ® Copyright © 2020 by Sturm, Ruger & Co., Inc. With products made in America, Ruger offers consumers almost 700 variations of more than 40 product lines. For more than 70 years, Ruger has been a model of corporate and community responsibility. Is one of the nation's leading manufacturers of rugged, reliable firearms for the commercial sporting market. Ruger Mark I, Mark II and Mark III Serial Numbers - Muzzle First.
WARNING: Always check the firmware you need to download using RUC first (linked below).
Before you start, I must say that updating a router's firmware is not for the faint hearted and I take no responsibility if anything goes wrong with your router. This is pretty much a n00b friendly tutorial, so you should be okay, if you follow everything as written in the RouterTech's help docs and in this tutorial. Now over to the tutorial:
Please download the following tools and confirm the settings following afterward.
1- Download RUC (Router Update Checker, available here
2- Download WEB (Wireless Environment Builder, available here).
3- Download your router's latest official firmware (you should have a copy, in case this goes kaput).
Now whatever you do, don't blame me. Next open up RUC and enter your router login info, defaults are:
check all boxes at the bottom (they are there for a reason).
* You can edit the routers.txt and make an entry for DSL-2640T as follows too:
DSL-2640T 4 Civilization v - civ and scenario pack: denmark (the vikings) for mac 7.
Once RUC gives you a report, it should be similar to the following:
Now, the things to make sure in the above log are:
The above settings will qualify you for a RouterTech firmware upgrade. The reason to run RUC was to backup all your settings and configurations at one place. If you have not backed-up your settings, do it now. No one will be responsible, if you do this carelessly and brick your router.
Download RouterTech firmware from http://routertech.org/forum.php. You must register on the forum to download the firmware. For DSL2640T, you'll need the RoHS 4-port PSP firmware. It should be named something as follows:
routertech-rohs-ar7wrd-pspboot-firmware-xxxxxxx.zip
extract it to some directory and open up the upgrade.html file and DO WHAT IT SAYS.
1- back-up all your settings
a- /proc/ticfg/env
b- /proc/interrupts
c- /etc/led.conf
d- config.bin (using your router's 'save config to hard disk' option in the web panel)
2- reset your router to factory default settings. reboot.
3- once the router comes back online, save all settings and reboot again.
4- open up the update firmware panel in the router's web panel; Tools->Firmware and browse to where you extracted the above zip file and select:
routertech_ar7wrd_1350a_pspboot_firmware_xxxxxxx_xxx
Now click on Apply and pray to God that all goes well. Leave the router alone for about
8-10 MINUTES…
After ten minutes, telnet into your router again and see if it lets you log in using:
Log in using user:Admin and pass:Admin
If the router let you log in, go to your Router's web panel and into the System panel. Click on Restore Factory Settings and Reboot. Once the router comes online. Telnet back into your router:
type
and take a look at the variables and back them up.
Next perform the following steps:
once again, when the router comes back online. Telnet again into the router and type:
D Link Dsl 2640u T1 Firmware Update Download 64-bit
Reboot the router once again and you should have a working DSL-2640T running with everything on a custom routertech firmware. You can issue all the commands above in a single go but I say, do not mess with your router, unless you are confident of your actions.
For the people, who do not have their WLAN working, after the upgrade or even so before the upgrade, please follow the steps below:
A common issue for many people on a router exists, where the AP stays off and only comes online by using
D Link Dsl 2640u T1 Firmware Update Download Windows 7
However, this can create issues on the environment side and the solution itself is temporary too. The actual issue is a corrupted WLAN EEPROM, which needs to be fixed:
– Extract WEB (Wireless Environment Builder) somewhere in a directory and open it up.
– Fill up the information it asks for.
– If you do not have a TWNET ID, go to your router's system logs. They can be found in Status->SystemLog. Browse them and find the line where it says:
– Look for a string similar to this:
– there, the string next to 'nvs_' is your TWNETID i.e.5e015cf4a901151d. It should be different for you.
– copy it in WEB and click on 'get router details' or 'build environment'. It should work and after a while, it will ask you that it can send the script directly to the router. Do so, and let the router reboot after that. You're done, once the Router comes back online, go check your environment now and you're good to go.
D Link Dsl 2640u T1 Firmware Update Download For Pc
I hope this will help many people. You might wanna head over to RouterTech for more help and if you run into any issues. Those guys are a great help and they have some fantastic stuff there.
Regards,
M.H.A.Q.S.
D Link Dsl 2640u T1 Firmware Update Download Windows 10
Related posts:
This entry was posted on Friday, February 20th, 2009 at 11:53 am
D Link Dsl 2640u T1 Firmware Update Download Pc
You can follow any responses to this entry through the RSS 2.0 feed.
Tags: 2640t, custom, dlink, dsl 2640t, firmware, psp, routertech, update, wireless
Posted in: MicroHard, Misc, Routers, Tutorials